The safety of electric hospital beds is of utmost importance in ensuring that patients receive proper care and treatment. The Electric Hospital Bed Safety Standard is a set of guidelines and regulations that must be followed to ensure the safety of these beds. The standard includes specific requirements for the design, construction, and performance of electric hospital beds.
The standard includes guidelines for the safe operation of electric hospital beds, including requirements for control panels and safety features such as side rails and brake systems. The standard also requires that the beds be designed and constructed to withstand certain loads and stresses and be tested to ensure that they meet certain performance standards.
In addition to these requirements, the Electric Hospital Bed Safety Standard also includes guidelines for the safe use and maintenance of electric hospital beds. This includes instructions for proper cleaning and disinfecting of the beds and requirements for regular inspection and cares to ensure that the beds remain in good working condition.
By adhering to the Electric Hospital Bed Safety Standard, hospitals and healthcare providers can help ensure their patients' safety and well-being. It is important that all electric hospital beds are properly maintained, inspected, and operated, following the guidelines outlined in the standard. Patients and their families can rest assured that they receive safe and reliable care when treated on an electric hospital bed that meets these important safety standards.
What Are the Types of Electric Hospital Bed Malfunctions That Cause Injuries?
There are several reasons why we should discuss hospital bed standards. Among many U.S. Food and Drug Administration(FDA) articles published in 2017, around two and a half million hospital and nursing home beds were put to work in the Country. Data shows that before 2009 for fourteen years, there were some 803 incidents of patients* getting caught, trapped, entangled, or strangled in beds with rails—the majority of the reported incident indicate resulting the frail and older adult dying. In 2013 however, the number of reported cases is upward of 900. Read FDA hospital beds Report
As the name suggests, electrical Hospital beds are operated using electrical power. That means you can maneuver the patient's position on the bed by pushing a single button. You can raise or lower the bed according to the requirement of the patient who spends a prolonged period lying on it. In short, electrical Hospital beds are mostly used by patients suffering from serious injuries or chronic diseases.
The Benefits of Using Electrical Hospital Beds
A simple economic comparison between the standard and electrical beds indicates that the letter helps reduce the risk of injury among the patients and the medical staff. For example, an economic assessment suggests that back injuries can dramatically occur among patients who use beds without modified backrests. The electrical Hospital beds reduce this problem significantly.
As the health care providers can easily adjust the bed's height, patient handling becomes extremely easy. Less time is spent on helping the patient reposition and transfer, and more time for other healthcare activities is saved. It also supports the patients to have control over their bodies.
Reposition is another problem that patients who use the standard bed often face. The electrical Hospital beds address this problem, and it empowers the patients to adjust the bed's position according to their requirements. As the patient themselves can control the bed profile, they can reduce the chances of injury and pressure-associated damage. They can also reposition themselves without asking for help from a Health Care provider.
Even though these words are not directly related to the number of staff working at the Health Care facility, if you think carefully, you will realize that electric hospital beds significantly reduce the required healthcare staff.
You need to educate your hospital staff to handle the beds properly; not providing enough training to handle electric beds can also be a source of concern. It will only help you to read the maximum benefits of these adjustable beds in the future.
The patient's ability to change the bed profile helps them avoid immobility-related problems. Here are several benefits that the patient reaps.
- Better lung function
Improve cardiac workload
- Enhanced cuff mobility and proper nutrient absorption
- Better urinary drainage and reduced risk of infection
- Reduce muscle wastage and improve joint flexibility
If used properly, electrical Hospital beds can significantly reduce pharmacy costs and shorten patient stays in healthcare facilities. These beds can also boost staff morale and patient satisfaction.
Things To Consider While Introducing Electrical Hospital Beds
Even though electrical Hospital beds offer clear benefits, you may face some difficulty introducing them. It would be best if you considered some factors while introducing these ways to your Healthcare facility.
Moving The Beds
Electrical Hospital beds are significantly heavier than regular beds. Moving these beds from one surface to the next can be a bit difficult. As most of these beds come with Wheels of their own, moving them on flat surfaces is a relatively easier task. However, it can become a significantly difficult task if you need to move these beds with even a small incline. Talk to the supplier to find out how you can avoid this problem.
Electrical Issues
In most hospitals, beds are moved from one room to the next, along with the patients. The bed can also be moved during the cleaning process. During this time, if the cables keep trailing from the bed, it can also create trip hazards and cause significant damage to the device. So, purchasing the beds requires checking whether the electrical cables are installed properly. It will help you to reduce the chances of damage significantly.
In some Hospital beds, pressure-relieving mattresses are used. In such cases, there is always a chance of the cables getting damaged as the Healthcare professionals adjust the beds. So while installing the electrical Hospital beds at your health care facility, you should take proper measures to reduce the chances of such damages. It is always better to follow the manufacturer's instructions to keep the electrical Hospital beds in top condition. You should also ensure that your acidity's electrical infrastructure is strong enough to accommodate the additional load of the electrical Hospital beds. You may also need to install additional power points to keep the electrical Hospital bed functional.
In any Hospital, beds are considered one of the major pieces of equipment. While there is no doubt that you can use the standard Hospital bit at your facility, an electrical Hospital bed will help you improve the patient's mobilization and positioning-related issues.
We should remember electric beds can also be a source of injuries in health care. Care should be taken when using beds with rails. Especially unconscious patients with cognitive issues are more to move excessively in bed. As such, there are some instances where injuries are associated with bed rail use resulting in patients getting harmed. They resulted in patients getting harmed. For example, a patient can sustain injuries when sliding out of bed or banging from side to side. Lowering the bed as much as possible and finding a safe zone is better. Excessive lowering of the bed can present as a form of restraint to the patient that wants to get out of bed. Following the manufacturer's recommends as an alternative way to prevent injuries. Placing a cushion or a floor mat by the bedside may be used to reduce injuries to the patient who wants to get out of bed. Remember, an improperly placed rug is typical for causing trip-related fall injuries.